Thursday, 09 May 2013 10:34 |
Standard Product Specification:
AC Power Cable
Code Designation |
Max Conductor Tempreture (°C) |
Rated Voltage |
No. & Nominal‚ Cross Section Area of Cond. (mm²) |
PIW P/N |
H03V VH2-F |
70°C |
300V |
2 X 0.5 2 X 0.75 |
200125-1 MM0207-1A |
H03V V - F |
70°C |
300V |
3 X 0.5 3 X 0.75 4 X 0.5 |
MM9907-5 10106405 MM1012-9 |
H05V VH2 - F |
70°C |
300V / 500V |
2 X 0.75 2 X 1.0 2 X 1.5 2 X 2.5 |
MM0212-1 MM0212-2 MM1006-7 MM0604-4 |
H05V V - F |
70°C |
300V / 500V |
2 X 0.75 |
MM9910-1 |
H05V V - F |
70°C |
300V / 500V |
3 X 0.75 3 X 1.5 3 X 2.5 4 X 0.75 4 X 1.0 4 X 2.5 5 X 1.0 |
MM0104-1 MM9908-2 990722-5 MM9912-2A MM1003-19 MM0611-18A MM1112-1 |
TEL-Communication Cable
No of Pair |
Conductor |
Insulation |
Jacket |
P/N |
OD |
Material |
OD |
Material |
OD |
Material |
16P |
0.4mm |
CU |
0.85±0.05mm |
Foamed Skin PE |
8.70±0.30mm |
PVC |
TC1111-1 |
32P |
0.4mm |
CU |
0.85±0.05mm |
Foamed Skin PE |
11.70±0.30mm |
PVC |
TC1111-2 |
16P |
0.5mm |
CU |
1.05±0.05mm |
Foamed Skin PE |
10.70±0.30mm |
PVC |
TC1106-5 |
32P |
0.5mm |
CU |
1.05±0.05mm |
Foamed skin PE |
14.60±0.50mm |
PVC |
TC1111-3 |
4P |
0.5mm |
CU |
1.05±0.05mm |
Foamed Skin PE |
6.20±0.20mm |
PVC |
TC1010-1 |
8P |
0.5mm |
CU |
1.05±0.05mm |
Foamed Skin PE |
8.10±0.25mm |
PVC |
TC1012-6 |
Coaxial Cable (Category 1)
Type |
Conductor |
Insulation |
Braid Shield |
Jacket |
Nominal Capacity PF/M |
Nominal Impedance (?) |
Attenuation |
P/N |
(AWG) No./MM |
MTR |
MTR |
(Dia.) MM |
MTR |
AWG/ CVG(%) |
MTR |
Overall Diameter |
(MHZ) |
DB KM |
RG-59/U |
1/0.643 |
C |
PE |
3.70±0.15mm |
C |
91% |
PVC |
6.15±0.15mm |
69 |
73 |
100 |
120 |
CA0604-6 |
RG-213 |
7/0.752 |
C |
PE |
7.20±0.20mm |
C |
96% |
PVC |
10.30±0.30mm |
98 |
50 |
200 |
98 |
CA0604-7 |
RG-58A/U |
19/0.18 |
C |
PE |
2.90±0.10mm |
C |
92.70% |
PVC |
5.0±0.20mm |
100 |
50 |
1000 |
557 |
CA0605-5 |
RG-174/U |
7/0.16 |
C |
XLPE |
1.52±0.05mm |
TC |
94% |
PVC |
2.75±0.15mm |
101 |
50 |
1000 |
1115 |
CA1210-1 |
Coaxial Cable (Category 2)
Type |
Conductor |
Insulation |
Braid Shield |
Jacket |
Nominal Capacity PF/M |
Nominal Impedance (ohm) |
Attenuation |
P/N |
(AWG) No./MM |
MTR |
MTR |
(Dia.) mm |
MTR |
AWG/ CVG(%) |
MTR |
Overall Diameter |
(MHZ) |
DB 100FT |
1.5C 2V |
1/0.26 |
C |
PE |
1.600±0.08 |
C |
93.80% |
PVC |
3.0±0.20 |
69 |
75 |
200 |
12 |
CA9710-1 |
2.5C 2V |
1/0.40 |
C |
PE |
2.40±0.10 |
C |
92.70% |
PVC |
4.10±0.20 |
69 |
75 |
200 |
8 |
CA0505-8 |
1.5D 2V |
7/0.18 |
C |
XL PE |
1.63±0.03 |
C |
89.20% |
PVC |
3.0±0.20 |
104 |
50 |
200 |
12 |
CA9801-1B |
USB Cable
UL STYLE |
Conductor |
Insulation |
Jacket |
1P |
2C |
1P |
2C |
OD |
Material |
AWG |
CU |
AWG |
CU |
OD |
Material |
OD |
Material |
2725 |
28AWG |
7/0.127 |
24AWG |
7/0.20 |
0.85±0.05mm |
HD Foam PE |
1.12±0.05mm |
SR PVC |
4.70±0.2mm |
PVC |
20276 |
28AWG |
7/0.127 |
28AWG |
7/0.127 |
0.78±0.05mm |
HD PE |
0.78±0.05mm |
SR PVC |
3.50±0.15mm |
PVC |
20276 |
28AWG |
7/0.127 |
24AWG |
11/0.16 |
0.85±0.05mm |
HD FM PE |
1.12±0.05mm |
SR PVC |
4.80±0.2mm |
PVC |
*Click Here for Customization Design Request Form |
|
Thursday, 02 May 2013 11:12 |
Pan-International Wire & Cable (M) Sdn. Bhd.
We are a manufacturing company specialised in wires and cables for computer, tele-communication, household electrical and electronic appliance wiring use. We had been in business since early 1989. The production facility is located in Kawasan Perusahaan Seberang Jaya, Seberang Perai, Penang. We are URGENTLY inviting highly motivated and dedicated individuals to join us for the following position:-
 Production Clerk, Operator Penang - Seberang Jaya
Responsibilities:
- Make production job corrections involving direct and indirect labor, quantities produced, quantities scrapped, and labor reported at both manufacturing facilities
- Run Job Error Processing twice per day, at the start and end of shift
- Review each Production Job upon completion to verify accuracy of parts received, material issued, and scrapped quantities
- Work closely with Supervisors in communicating errors needed to be resolved in a timely manner
- Maintain files of Job Paperwork by Product Codes according to ISO Standards
- Assist when necessary in the printing of required labels and forms of Job Paperwork
Requirements:
- Candidate must possess at least a Primary/Secondary School/SPM/ "O" Level, Diploma, Advanced/ Higher Graduate Diploma, any field.
- Required skill(s): Ms. Office
- Ability to work independently with minimum supervision.
- Required Language(s): English, Mandarin, Bahasa Malaysia
- Applicant must be able to work in Seberang Jaya.
- Fresh graduates/ Entry level are encouraged to apply.
- Full time position(s) available
Come and be a part of our company! Send in your resume to aishah
This e-mail address is being protected from spambots. You need JavaScript enabled to view it
PAN-INTERNATIONAL WIRE & CABLE (M) SDN.BHD.
Plot 6, Jalan Jelawat 1, Kawasan Perusahaan Seberang Jaya, 13700 Seberang Perai, Pulau Pinang. Tel: 04-3993516 Fax: 04-3986248 Website: http://www.piw.com.my
ÂÂ
|
Thursday, 18 April 2013 10:34 |
Thank you for your email. Our salesperson will contact you as soon as possible. |
|
Monday, 29 April 2013 10:33 |
What is UL Standard?
UL Standards development covers more than just products; it also includes testing of systems and services. UL develops a wide variety of standards to measure and validate performance, environmental health and sustainability.
Our UL Products for Hook-up wire
 |
Click on the PDF icon to view more our UL iQ for Appliance Wiring Materials |
|
|
Wednesday, 17 April 2013 15:31 |
Pan-International Wire and Cable (M) Sdn. Bhd. has ISO 9001:2015 registered quality systems whichensure business practices and manufacturing processes meet an internationally recognized standard. The update of the certification each year with specially trained internal auditor ensures the best quality in our manufacturing product.
We are committed to the highest standards of the wire manufacturing industry. We have certified auditors on UL and CSA to ensure all our product are compliance to these standards. UL and CSA registration which give you the confidence you to need to know that products are built correctly.
Our experience staff and the ongoing training of our manufacturing operators ensure that your products will be built correctly and those who understand the importance doing the job right.
Compliance with growth in environmental and restricted substances standards is vital in the global market today. We work together with our customer to ensure all our product meets the applicable standards.
We are also certified in other standards as well to meet all our customer requirement and standards which extend our capability in building high quality products. |
|
|
|
|
<< Start < Prev 1 2 3 Next > End >>
|
Page 2 of 3 |